Furniture shaped by the room

Hinged-door wardrobes in Benahavís

We can assist you inEspañolEnglishDeutschРусский

Hinged-door wardrobes in Benahavís. Each door swing is checked against the bed, bedside tables and room doors. Hinges must allow access to internal drawers.

Plan my project → WhatsApp

The spaceA front-facing photo
DimensionsWidth, height, depth
StorageWhat it needs to hold

Designed for your space

Full access where the bedroom allows the doors to swing

A hinged door reveals the whole module, but its width and swing must work with the bed, bedside tables, sockets and circulation. The proposal continues to prioritise proportion, premium but practical surfaces and discreet integration of appliances and storage.

Designed for the space

Dimensions and layout are checked against the room and your priorities.

Choices explained

We compare suitable materials and hardware before the specification is approved.

Scope in writing

The quotation identifies the furniture, fitting and any optional or separate work.

One project contact

Your contact coordinates questions about the proposal and the next steps.

Raquel CarmonaYour contact in Benahavís

Your project starts here

Make the important details clear from the start.

I'm Raquel Carmona. Tell me what you expect from the design and what you do not want overlooked. I'll help you organise references, materials and requirements into a practical furniture brief.

No obligation. Rough measurements are enough to get started.

Share my idea Chat on WhatsApp

Capacity you can check

Each door should correspond with the interior it opens

More doors do not guarantee better access. We agree width, hinges, handles and modules so the elevation remains proportionate and practical. In Benahavís, it is tested against controlled access, larger rooms, interior-design programmes and exacting installation details.

Swing clearance

With the recess verified, we draw every door open against the bed, bedside table, wall and entrance door. Approval depends on one clear result: the user can stand in front without becoming trapped.

Proportionate door width

The solution is tested in two stages. First, we relate door count to modules, height and elevation rhythm. Then, the doors do not become heavy or fragment the elevation without reason.

Sized hinges

We select hinge quantity and type according to height, weight and opening. Each door retains alignment and adjustment through use.

Fully visible interior

Instead of assuming a standard answer, we align the door, division and pull-out accessories. The intended result can be stated plainly: drawers, rails and baskets remain accessible without overlap.

Three situations

Three bedrooms where door swing changes the design

A hinged door works well when the elevation, interior and space in front have been drawn together. The scenarios are adjusted for villas, large apartments and carefully specified homes in hillside developments.

Custom hinged-door wardrobes for shared wardrobe in Benahavís

Scenario 01 · El Madroñal

Six doors giving full view of each module

We divide the elevation around personal interiors and one shared zone once dimensions have been checked. The direct consequence: each person opens their module without moving another door. For a property around La Quinta, access and handling are reviewed before component sizes are fixed.

Starting point: Before this part is approved, we confirm the distance to the bed and both bedside tables. The objective is clear: every door has a clear swing. The actual property conditions in Benahavís take priority over a catalogue solution.
Decision: To settle this decision without improvising on site, we assign one or two doors to each group of rails, drawers and shelves. The result can then be checked: the elevation explains the internal organisation.
Before manufacture: From the first proposal, we test handles, simultaneous opening and access to lower drawers. The expected outcome: two users can use the wardrobe without conflict.

Custom hinged-door wardrobes for end beside a wall in Benahavís

Scenario 02 · Monte Mayor

A final door that opens without striking the wall

The handle and edge do not mark the perpendicular wall. That is why we allow separation, an opening restriction or a proportionate trim. The proposal must continue to prioritise proportion, premium but practical surfaces and discreet integration of appliances and storage.

Starting point: The conflict is known before component planning. That is why we measure the side wall, skirting, switch and handle projection.
Decision: The solution is tested in two stages. First, we adjust the trim, hinge and maximum angle of the end door. Then, the module retains a comfortable opening. The actual property conditions in Benahavís take priority over a catalogue solution.
Before manufacture: Geometry sets the limit. Within it, we examine drawers and accessories against the available angle. The answer must meet one condition: the swing restriction does not create another internal obstruction.

Custom hinged-door wardrobes for tall door in Benahavís

Scenario 03 · Los Flamingos

Continuous panels with correctly specified hinges

The decision starts with day-to-day use: we calculate weight, stiffness, hinges and adjustment points. The intended result is this: the vertical composition does not lose stability. The proposal must continue to prioritise proportion, premium but practical surfaces and discreet integration of appliances and storage.

Starting point: Sequence matters. First, we measure height, level variation and allowance between door, floor and ceiling. The second condition: the panel can swing without rubbing.
Decision: We choose substrate, thickness and hinge quantity for the intended finish during design. The detail is resolved when the result is clear: weight and deflection remain controlled.
Before manufacture: This point is explained before pricing: we confirm transport and space for offering up the door during fitting. The later check confirms the essential result: the component arrives, hangs and adjusts safely. In Benahavís, this decision is also checked against controlled access, larger rooms, interior-design programmes and exacting installation details.

Configuration gallery

Examples of hinged-door wardrobes

Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.

Hinged-door wardrobes in Benahavís: white custom wardrobe with hinged doors — 01
**White custom wardrobe with hinged doors**Smooth floor-to-ceiling fronts sit neatly within a bedroom in Benahavís with original patterned tiles

Hinged-door wardrobes in Benahavís: full-wall walnut hinged wardrobe — 02
**Full-wall walnut hinged wardrobe**Tall doors and slim black handles form a warm composition beside the balcony

Hinged-door wardrobes in Benahavís: olive-green hinged wardrobe in an alcove — 03
**Olive-green hinged wardrobe in an alcove**Three pairs of doors use a contained wall without narrowing the route around the bed

Hinged-door wardrobes in Benahavís: light-oak custom hinged wardrobe — 04
**Light-oak custom hinged wardrobe**Careful side and ceiling fillers complete a clean installation in a bedroom with exposed beams

Hinged-door wardrobes in Benahavís: classic hinged wardrobe with fitted interior — 05
**Classic hinged wardrobe with fitted interior**An open door reveals a rail, shelves and drawers behind warm-white fronts and brass handles

Hinged-door wardrobes in Benahavís: compact custom wardrobe for a small bedroom — 06
**Compact custom wardrobe for a small bedroom**Two hanging rails, an upper shelf and drawers organise daily clothing in a narrow module

Hinged-door wardrobes in Benahavís: hinged wardrobe fitted around a structural column — 07
**Hinged wardrobe fitted around a structural column**Different-width modules absorb the projection while keeping every storage section accessible

Hinged-door wardrobes in Benahavís: l-shaped custom hinged wardrobe — 08
**L-shaped custom hinged wardrobe**The layout turns across two walls with compatible door swings and useful corner storage

Hinged-door wardrobes in Benahavís: hinged wardrobe beneath a sloping roof — 09
**Hinged wardrobe beneath a sloping roof**Stepped doors, shelving and a rail follow the pitch to recover storage within the eaves

Hinged-door wardrobes in Benahavís: bridge wardrobes around the bed — 10
**Bridge wardrobes around the bed**Side towers and overhead cupboards free floor space while retaining straightforward hinged access

Hinged-door wardrobes in Benahavís: hinged hall wardrobe with shoe storage — 11
**Hinged hall wardrobe with shoe storage**Coats, shoes and bags share a full-height cupboard, bench and ventilated drawers

Hinged-door wardrobes in Benahavís: oak wardrobe with woven-cane hinged fronts — 12
**Oak wardrobe with woven-cane hinged fronts**Natural fibre ventilates the interior and adds texture to a warm coastal-home scheme

Hinged-door wardrobes in Benahavís: custom wardrobe with a concealed office — 13
**Custom wardrobe with a concealed office**Two hinged doors hide the desk, sockets, task lighting and shelves after the working day

Hinged-door wardrobes in Benahavís: premium illuminated walnut wardrobe — 14
**Premium illuminated walnut wardrobe**Two open compartments reveal hanging rails, drawer units and warm lighting behind matched veneer fronts

Hinged-door wardrobes in Benahavís: adaptable hinged wardrobe for a teenager — 15
**Adaptable hinged wardrobe for a teenager**Adjustable shelves, a rail, drawers and a side bookcase let the storage change over time

Hinged-door wardrobes in Benahavís: shallow hinged utility wardrobe — 16
**Shallow hinged utility wardrobe**One door opens onto household linen, cleaning storage and an ironing-board slot in a narrow corridor

Instagram

A closer look at our studio

How a hinged wardrobe elevation changes

Width, height, handle and hinge produce different demands. The internal storage sets the most useful rhythm. The actual property in Benahavís completes the choice.

Configuration	Usually solves	Critical check
Two wide doors	Planning scenario: Short wardrobe with broad access	Critical point: Weight and swing space
Four or six doors	Most frequent use: Long wall with clear modules	The survey must confirm: Rhythm, junctions and simultaneous opening
Full-height door	Frequent application: Continuous vertical elevation	Do not close the design without reviewing: Stiffness, hinges and floor clearance
Separate top cupboard	Suitable situation: Daily storage below, seasonal above	The survey must confirm: Horizontal line and access
Applied handle	Primary role: Direct opening and visible detail	The survey must confirm: Projection, impact and ergonomics
Finger pull or push	The option is assessed for: Quieter elevation	The site survey tests: Grip, fingerprints and adjustment

Written scope

What the hinged wardrobe project includes

The project documentation shows the elevation closed and open, allowing swing, access and layout to be approved before workshop production.

Room survey

First, we survey the wardrobe, bed, bedside tables, doors, windows, sockets and route. After that, each door swing starts from the complete room.

Elevation design

We define quantity, width, height, joints, handles and horizontal lines during design. The detail is resolved when the result is clear: the elevation responds to the interior and wall proportion. The proposal must continue to prioritise proportion, premium but practical surfaces and discreet integration of appliances and storage.

Coordinated interior

Before this part is approved, we align modules, rails, drawers and accessories with each opening. The objective is clear: all contents are reached through the corresponding door.

Hinges and opening

We begin with one practical check: we specify load, hinge quantity, closing, restriction and adjustment. It produces a specific result: the intended movement is documented.

Manufacture and finishes

We begin with one practical check: we close substrate, thickness, lacquer, veneer, board, mirror and edges. It produces a specific result: the door retains flatness and durability.

Fitting and alignment

Sequence matters. First, we hang, adjust gaps, check closing and review rubbing points. The second condition: the elevation is handed over level and functional.

Moving switches, correcting walls, decoration or removing the old wardrobe are separate items when applicable. Any additional work identified in Benahavís is added only after it has been explained and priced.

Programme, cost and guarantee

Door swing is validated before the workshop slot

Door count, height, finish, hinges, interior and fitting space change cost and programme. In Benahavís, we also confirm controlled access, larger rooms, interior-design programmes and exacting installation details.

From enquiry to final adjustment

01
Useful enquiry
We review photographs, rough dimensions and what the wardrobe project needs to achieve, then explain what information is missing.
02
Technical survey
The surrounding area, opening, access and door movement are checked before the internal plan and elevation are approved. The approach is adapted to villas, large apartments and carefully specified homes in hillside developments, without turning location into a preset style.
03
Closed decisions
Drawings, finishes, hardware, agreed scope and quotation are accepted before production is booked.
04
Adjusted installation
Delivery, protection, installation, adjustment and final review are coordinated in Benahavís.

Where the investment changes

Quantity and format

We study wide doors, higher door counts, top cupboards and continuous panels as part of the drawing rather than at the end. The practical consequence: the selected composition reflects its actual work.

Hinges and closing

We size hinges, soft closing, push catches, restrictors and accessories rather than transferring a standard composition. On that basis, the project has a specific outcome: each mechanism relates to weight and frequency.

Finish and handles

Preparation, edging and machining appear in the commission detail. That is why we review in parallel board, lacquer, veneer, mirror, finger pulls and applied handles.

Interior and fitting

We include carcasses, equipment, access, hanging, adjustment and review. The decision is recorded. The final reference: the elevation is assessed as part of the complete wardrobe. The approach is adapted to villas, large apartments and carefully specified homes in hillside developments, without turning location into a preset style.

Local context · Benahavís

The Benahavís context changes the breakdown, not the standard

Projects may involve villas, large apartments and carefully specified homes in hillside developments. We do not assign one solution to an area: the construction, use and fitting route of each property are checked.

Monte Mayor and Los Flamingos: reading the property

For custom hinged-door wardrobes, broad photographs and one rough dimension usually reveal what needs checking during the survey. The brief remains tied to the actual room.

Access and component sizes around Benahavís Pueblo

Controlled access, larger rooms, interior-design programmes and exacting installation details can change panel sizes, the delivery order and fitting time. We record those facts before manufacture.

Everyday use from La Quinta to Los Arqueros

The recommendation continues to prioritise proportion, premium but practical surfaces and discreet integration of appliances and storage. Materials and accessories are compared by care and usefulness, not by a presumed local style.

Documented confidence

A traceable project from enquiry to handover

We publish how to contact us and when the team is available. Project-specific conditions in Benahavís are recorded before the order reaches the workshop.

After handover

Coverage, duration, supplied elements, fitting conditions, maintenance and exclusions are set out in writing prior to production.

Languages

We work in Spanish, English, German and Russian, by WhatsApp, e-mail or at the Benahavís office by appointment.

Your point of contact

The MMV Studio project team receives enquiries from Benahavís and assigns a project manager to coordinate the survey, project documentation, finishes and fitting.

An identifiable channel

Trading name: MMV Studio · mueblesamedidabenahavis.es · proyectos@mueblesmedidavalencia.es. Full legal details are linked from the legal notice.

Published hours

You can write Monday–Friday, 09:00–13:00 / 14:00–20:00, or Saturday, 10:00–13:30 / 16:00–19:30.

Read the legal notice → See all published reviews →

Raquel CarmonaYour contact in Benahavís

The next step

Shall we look at your space?

Send your references with a short list of requirements you do not want overlooked. We'll review those conditions before moving towards a detailed proposal.

Scope and terms are confirmed before you place an order.

Request a proposal Ask a question

Before requesting a quotation

Questions about custom hinged-door wardrobes in Benahavís

Can a wide door be divided?＋

Narrower leaves can be compared where they improve opening, weight or proportion. The interior must remain accessible.

What do I need for an initial enquiry?＋

Send photographs, approximate dimensions and what you want the furniture to do. We will identify any details needed before a measured survey or quotation.

What is confirmed before manufacture?＋

The design, dimensions, materials, hardware, price and installation scope need to be agreed. Changes are reviewed before they are put into production.