Designed for the space
Dimensions and layout are checked against the room and your priorities.
Bespoke dressing rooms in Benahavís. Storage is divided by person and clothing type, leaving space to open drawers and use facing sections.
Getting dressed, sharing the room itself, opening drawers, using a mirror and keeping everything accessible requires storage, light and circulation to work together. The proposal continues to prioritise proportion, premium but practical surfaces and discreet integration of appliances and storage.
Dimensions and layout are checked against the room and your priorities.
We compare suitable materials and hardware before the specification is approved.
The quotation identifies the furniture, fitting and any optional or separate work.
Your contact coordinates questions about the proposal and the next steps.

I'm Raquel Carmona. Tell me what you expect from the design and what you do not want overlooked. I'll help you organise references, materials and requirements into a practical furniture brief.
No obligation. Rough measurements are enough to get started.
Apparent capacity is of little value if one person blocks another, a door enters the route or a dark corner becomes unusable. The drawing must show how the surrounding area works as well as what it holds. In Benahavís, it is tested against controlled access, larger rooms, interior-design programmes and exacting installation details.
During design, we draw the clear width with drawers, doors and rails in use. The drawing can progress once this result is clear: two everyday actions should not cancel each other out.
We separate daily clothes, seasonal storage, shoes, accessories, dressing table and luggage. One condition still applies: each user reaches frequent items without crossing the whole room.
Sequence matters. First, we combine general lighting, internal lighting and mirror position without harsh shadows. The second condition: colours, garments and drawers can be seen at any time of day.
We decide what remains open and what is better protected behind doors, drawers or glazed fronts during design. The detail is resolved when the result is clear: the room remains calm without exposing everything to dust and light.
These scenarios begin with different habits and room shapes. They explain the decisions; every final project documentation is drawn after the dwelling has been surveyed. The scenarios are adjusted for villas, large apartments and carefully specified homes in hillside developments.

We concentrate hanging, drawers and shoes on the deeper side and keep the opposite wall light rather than transferring a standard composition. On that basis, the project has a specific outcome: a narrow room works as a dressing area without becoming an overcrowded corridor. The actual property conditions in Benahavís take priority over a catalogue solution.

We assign walls and heights according to each person’s inventory, frequency and routine. One condition still applies: the working configuration avoids duplicating modules that one person does not need. The approach is adapted to villas, large apartments and carefully specified homes in hillside developments, without turning location into a preset style.

The proposal becomes more coherent when we size an island, bench or dressing table after securing the perimeter and routes. The requirement remains unchanged: the central element adds a function rather than merely filling spare space. The actual property conditions in Benahavís take priority over a catalogue solution.
Sixteen configurations showing different layouts, finishes and ways to integrate the furniture into a real room.
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on Instagram
Photo collection Furniture inspiration from MMV Estudio
View on InstagramThe shape is not chosen by trend. It depends on width, access, light, inventory and how many people use the space at the same time. The actual property in Benahavís completes the choice.
| Configuration | Usually solves | Critical check |
|---|---|---|
| L-shaped | Suitable situation: Two walls and separate routines | Verified during the survey: Corner reach and change of depth |
| U-shaped | Frequent application: Separate room with three fitted sides | Advance check: Central width and junctions between units |
| Walk-through dressing room | Need addressed: Connection between bedroom and bathroom | Advance check: Privacy, moisture and uninterrupted circulation |
| Enclosed storage | Need addressed: Dust control and a calmer view | The site survey tests: Ventilation, opening and drawer access |
| With island or bench | Need addressed: Folding, accessories and shoe area | The proposal must resolve: Perimeter clearance, sockets and overhead light |
| Open single wall | Planning scenario: Narrow room or bedroom annex | The drawing identifies: Clearance with drawers and clothes in use |
The design proposal defines the room itself, storage, planned lighting, materials, fitting and the limits of the order before workshop production begins.
We measure walls, height, squareness, doors, windows, skirting, sockets and climate services. One condition still applies: the dressing room begins with a documented shell.
We do not close this decision on an assumption. We note clothes, shoes, accessories, luggage, users and frequency. The final check is straightforward: each zone has a clear capacity and owner. For a property around La Zagaleta, access and handling are reviewed before component sizes are fixed.
This is not about adding more modules. We draw plans and elevations with clearances, openings and useful heights. Usefulness is tested in one way: circulation can be reviewed before workshop production.
We specify substrates, finishes, edges, runners, hinges, rails and accessories once dimensions have been checked. The direct consequence: each component responds to load, care and use.
We coordinate profiles, sensors, mirrors and electrical points when they form part of the included work once dimensions have been checked. The direct consequence: lighting is integrated without concealing required access.
First, we prepare component sizes, delivery, protection, levelling, adjustment and final review. After that, handover includes the operation of the fitted room.
Building work, decorating, climate systems, new electrical circuits or damp treatment are quoted separately where required. Any additional work identified in Benahavís is added only after it has been explained and priced.
The amount of furniture, number of elevations, drawers, lighting, accessories, materials and access conditions all change the investment. Commission detail is closed prior to manufacture is confirmed. In Benahavís, we also confirm controlled access, larger rooms, interior-design programmes and exacting installation details.
We review photographs, rough dimensions and what the walk-in wardrobe project needs to achieve, then explain what information is missing.
The bedroom, opening, access and door movement are checked before the storage plan and elevation are approved. In Benahavís, this decision is also checked against controlled access, larger rooms, interior-design programmes and exacting installation details.
Drawings, finishes, hardware, included work and detailed quotation are accepted ahead of production is booked.
Delivery, protection, installation, adjustment and final review are coordinated in Benahavís.
To settle this decision without improvising on site, we calculate useful walls, heights, depth changes, corners and finishing pieces. The result can then be checked: the amount manufactured corresponds to the actual room.
First, we count rails, shelves, drawers, shoe storage, trouser racks, display units and mirrors. After that, each extra can be justified by a specific routine.
We review in parallel open modules, doors, profiles, glass and mechanisms as part of the drawing rather than at the end. The practical consequence: protection, access and visual order are assessed together.
Only integration stated in the written commission detail is included. That is why we set out LED profiles, sensors, power, sockets, climate services and junctions. The proposal must continue to prioritise proportion, premium but practical surfaces and discreet integration of appliances and storage.
We do not close this decision on an assumption. We review the lift, stairs, corridors, protection, component sizes and fitting time. The final check is straightforward: logistics does not remain an unexpected cost at the end.
Projects may involve villas, large apartments and carefully specified homes in hillside developments. We do not assign one solution to an area: the construction, use and fitting route of each property are checked.
For custom walk-in wardrobes, broad photographs and one rough dimension usually reveal what needs checking during the survey. The brief remains tied to the actual room.
Controlled access, larger rooms, interior-design programmes and exacting installation details can change panel sizes, the delivery order and fitting time. We record those facts before manufacture.
The recommendation continues to prioritise proportion, premium but practical surfaces and discreet integration of appliances and storage. Materials and accessories are compared by care and usefulness, not by a presumed local style.
We publish how to contact us and when the team is available. Project-project-specific facts in Benahavís are recorded ahead of fabrication.
You can identify the channel before sending information: mueblesamedidabenahavis.es, MMV Studio and proyectos@mueblesmedidavalencia.es. Legal information is linked in the footer.
The team is available Monday to Friday from 09:00–13:00 and 14:00–20:00; on Saturday, 10:00–13:30 and 16:00–19:30.
Project documents describe coverage, validity, components, installation and care, together with any applicable exclusions.
mueblesamedidabenahavis.es gathers experiences in its own linked collection. They are not attributed to an external platform.
MMV Studio routes the request through a project manager who keeps the site survey, design, workshop and installation connected.

Send your references with a short list of requirements you do not want overlooked. We'll review those conditions before moving towards a detailed proposal.
Scope and terms are confirmed before you place an order.
Open storage keeps contents visible; doors conceal them and help protect against dust. The choice depends on space, upkeep and preference.
Send photographs, approximate dimensions and what you want the furniture to do. We will identify any details needed before a measured survey or quotation.
The design, dimensions, materials, hardware, price and installation scope need to be agreed. Changes are reviewed before they are put into production.
We will review your enquiry and contact you to clarify the scope and next steps. Sending this form does not place an order.